Why bridge into Robinhood Chain
Robinhood Chain is an Arbitrum Orbit layer 2 that launched July 1, 2026, with Uniswap V2, V3, and V4 live from day one. It is also one of the only EVM chains where tokenized equities trade natively, TSLA, NVDA, SPY, MSFT, AMD, and PLTR all have on-chain trading pairs on Robinhood Chain, alongside standard crypto assets like ETH, WETH, USDG, and USDe.
That combination, a brand new chain with real liquidity and tokenized stock exposure that does not exist anywhere else in DeFi, is why founders and traders are moving assets onto Robinhood Chain now rather than waiting. The problem is that your ETH or stablecoins are probably sitting on BNB Chain, Base, or Ethereum mainnet, not on Robinhood Chain itself. You need to bridge them over first.
MoonSale's Swap & Bridge tool does exactly that in one flow, no separate bridge website, no manual contract interaction, one page that swaps and bridges in a single transaction sequence.
What you need before you start
A wallet with funds on a supported source chain. BNB Chain, Base, and Ethereum mainnet can all bridge into Robinhood Chain today.
The asset you want to move. Native ETH or an ERC-20 like USDG or USDe work directly. If you are holding a token that is not natively bridgeable, swap it to ETH or a supported stablecoin on your source chain first, MoonSale's swap step handles that in the same flow.
A few minutes. Bridging is not instant like a same-chain swap, expect the transaction to take a few minutes to finalize on the destination chain depending on network conditions.
Step by step: swapping and bridging to Robinhood Chain
Step 1: Open Swap & Bridge and connect your wallet
Go to Swap & Bridge and connect your wallet. The page shows a "You pay" panel and a "You receive" panel, exactly like a same-chain swap.
Step 2: Set your source chain and token
In the "You pay" panel, select the chain your funds currently sit on, BNB Chain, Base, or Ethereum, and pick the token you want to move. Enter the amount, or tap MAX to use your full balance.
Step 3: Set Robinhood Chain as your destination
In the "You receive" panel, switch the chain selector to Robinhood Chain and choose the asset you want to end up with. This is where the swap-and-bridge combination matters: you can pay in one asset on your source chain and receive a completely different one on Robinhood Chain, the route handles the conversion and the cross-chain transfer together.
Step 4: Review the route
MoonSale sources routes from multiple decentralized exchanges and bridges, then ranks them so you can see the best price alongside the estimated gas cost in USD and the minimum amount you are guaranteed to receive after slippage. Review this before confirming, the amount you will receive and the gas estimate are both shown clearly on the page.
Step 5: Approve and confirm
If you are bridging an ERC-20 token, your wallet will prompt an approval transaction first, this lets the router move your tokens. After that, confirm the swap-and-bridge transaction itself. Your wallet will show the full transaction details before you sign.
Step 6: Wait for the bridge to finalize
Same-chain swaps confirm in seconds. Cross-chain bridges take longer, typically a few minutes, since the destination chain has to receive and verify the transfer. You can track the transaction status directly from the page.
Step 7: Verify your balance on Robinhood Chain
Once the bridge finalizes, check My Tokens with your wallet connected and Robinhood Chain selected. Your bridged asset should show up there immediately.
Which chains and tokens you can bridge from
As of today, MoonSale's Swap & Bridge supports moving assets into Robinhood Chain from three source chains: BNB Chain, Base, and Ethereum mainnet. On the receiving side, Robinhood Chain supports ETH, WETH, USDG, USDe, and yield-bearing variants like syrupUSDG and syrupUSDC, plus the tokenized equity pairs mentioned earlier.
If your source asset is not on this list, swap it to ETH or a supported stablecoin on your current chain first. The route finder on the swap page will suggest this automatically if it detects your selected token cannot bridge directly.
What you actually pay to bridge in
There is no separate MoonSale fee layered on top of a bridge transaction. What you pay is the route's own cost, shown transparently before you confirm: network gas on your source chain, plus whatever the underlying decentralized exchanges and bridge providers charge to execute the swap and transfer. MoonSale's route finder compares multiple options and surfaces the cheapest one it finds, along with the gas estimate in USD, so you are not guessing.
For a deeper look at what determines the actual price you pay on a given route, see Which Swap Offers the Cheapest Price on Robinhood Chain?.
Common mistakes to avoid
Bridging dust amounts. Gas costs are relatively fixed regardless of transfer size, bridging a few dollars worth of tokens can mean gas eats a large percentage of the value. Bridge in reasonably sized batches.
Not checking the destination token. Double check the asset shown in the "You receive" panel before confirming. Swap-and-bridge routes can convert your asset along the way, which is a feature, but only if you intend it.
Ignoring the minimum received amount. The page shows a guaranteed minimum after slippage. If that number looks far off from what you expect, the route may be thin on liquidity for that specific pair, try a smaller amount or a different asset pair.
Ignoring the sold slippage tolerance on volatile pairs. MoonSale defaults to a reasonable slippage tolerance, but on tokenized equity pairs or newly listed assets where liquidity is still building, price can move between the moment you review the route and the moment your transaction confirms.
What to do once your funds land on Robinhood Chain
Once your ETH or stablecoins are on Robinhood Chain, a few natural next steps:
Deploy a token. Create Token supports Robinhood Chain with a pre-filled Uniswap V2 router, no manual configuration needed.
Launch a presale or fair launch. Create Presale and Create Fair Launch both run on Robinhood Chain today. See How to Host a Presale on Robinhood Chain With MoonSale for the full walkthrough.
Trade tokenized stocks. Head back to Swap & Bridge and swap your bridged ETH or stablecoins directly into TSLA, NVDA, SPY, MSFT, AMD, or PLTR pairs, all live on Robinhood Chain from day one.
Frequently asked questions
Which chains can I bridge from into Robinhood Chain?
BNB Chain, Base, and Ethereum mainnet are all supported as source chains on MoonSale's Swap & Bridge page today.
How long does bridging to Robinhood Chain take?
Same-chain swaps confirm in seconds. Cross-chain bridges to Robinhood Chain typically take a few minutes to finalize, since the destination chain needs to receive and verify the transfer before your balance updates.
Can I bridge and swap to a different asset in one transaction?
Yes. You can pay in one asset on your source chain (for example ETH on Base) and receive a different asset on Robinhood Chain (for example USDG), the route handles the conversion and the cross-chain transfer as one combined flow.
Does MoonSale charge an extra fee to bridge into Robinhood Chain?
No separate MoonSale fee is added on top. You pay network gas on your source chain plus whatever the underlying decentralized exchanges and bridge providers charge for that specific route, shown transparently before you confirm.
What if my token is not on the supported list?
Swap it to ETH or a supported stablecoin on your current chain first, then bridge that into Robinhood Chain. The route finder will suggest this automatically if your selected token cannot bridge directly.
Can I bridge tokenized stocks like TSLA or NVDA onto Robinhood Chain?
You bridge ETH or stablecoins in first, then swap into tokenized equity pairs directly on Robinhood Chain through the same Swap & Bridge page, since those pairs trade natively on Robinhood Chain's own DEX liquidity.
Is it safe to bridge into a chain that only launched recently?
Robinhood Chain runs on Arbitrum Orbit infrastructure with Uniswap V2, V3, and V4 live from launch. As with any new chain, liquidity is still growing, which is why checking the minimum received amount and using reasonably sized transfers matters more than it would on an established chain.
What do I do if my bridge transaction is taking longer than expected?
Cross-chain bridges depend on both the source and destination chain confirming the transfer, occasional network congestion can extend the wait beyond the typical few minutes. Your funds are not lost, the transaction is simply still finalizing, check the transaction status on the swap page before assuming something went wrong.
Ready to move your funds?
Bridging into Robinhood Chain takes one page and a few minutes: Swap & Bridge. Once your funds land, deploy a token at Create Token or launch a presale at Create Presale, the same audited MoonSale contracts already running on BNB Chain, Base, and Ethereum.
